3DBenchy Test Print with Fluorinar™

3DBenchy Test Print with Fluorinar™

Fluorinar™ filament is made from Kynar® PVDF.

One of the most duplicated test prints in the world, 3DBenchy offers the ability to compare filament materials and optimized print parameters on a common model. At the 3DBency web page, this print is called “the jolly 3D printing torture-test”. This model is easy to print but hard to print well with all the different details.  Below are the slicing parameters in Cura that we have used for the Benchy model using different Fluorinar™ filaments.  We hope this will give you some insight into print parameters that will be helpful in your specific project!

File 3DBenchy 3DBenchy 3DBenchy
Kynar® Filament Material Fluorinar-C™ PVDF Fluorinar-B™ PVDF
Cura Release 4.5.0 4.5.0
Print Time 177 min
Print Images Benchy in Fluorinar-C™
Layer Height 0.2 mm
Initial Layer Height 0.2 mm
Line Width 0.3 mm
  Wall Line Width 0.3 mm
    Outer Wall Line Width 0.3 mm
    Inner Wall(s) Line Width 0.26 mm
  Top/Bottom Line Width 0.3 mm
  Infill Line Width 0.3 mm
  Skirt/Brim Line Width 0.3 mm
Initial Layer Line Width 100%
  Wall Line Count 3
Outer Wall Wipe Distance 0.2 mm
Top Surface Skin Layers 1
Top/Bottom Thickness 1.2 mm
    Top Layers 2
    Bottom Layers 2
Top/BottomPattern Lines
Bottom Pattern Initial Layer Lines
Top/Bottom Line Directions
Outer Wall Inset 0 mm
Optimize Wall Printing Order Yes
Outer Before Inner Walls No
Alternate Extra Wall Yes
Compensate Wall Overlaps Yes
  Compensate Outer Wall Overlaps Yes
Compensate Inner Wall Overlaps Yes
Minimum Wall Flow 0 %
Fill Gaps Between Walls Nowhere
Filter Outer Tiny Gaps No
Print Thin Walls No
Horizontal Expansion 0.1 mm
Initial Layer Horizontal Expansion 0.1 mm
Z Seam Alignment Random
Seam Corner Preference Hide Seam
No Skin in Z Gaps No
Extra Skin Wall Count 1
Enable Ironing No
Skin Overlap 0.2 mm
Infill Density 30%
  Infill Line Distance 2 mm
Infill Pattern Grid
Connect Infill Lines Yes
Infill X Offset 0.1 mm
Infill Y Offset 0.1 mm
Randomize Infill Start No
Infill Line Multiplier 1
  Infill Overlap 0.2 mm
Infill Wipe Distance 0.2 mm
Infill Layer Thickness 0.2 mm
Gradual Infill Steps 0
Infill Before Walls No
Minimum Infill Area 0.1 mm2
Infill Support No
  Top Skin Removal Width 1 mm
  Bottom Skin Removal Width 1 mm
  Top Skin Expand Distance 1 mm
  Bottom Skin Expand Distance 1 mm
  Minimum Skin Width for Expansion 0.1 mm
Printing Temperature 250 C
Printing Temperature Initial Layer 250 C
Initial Printing Temperature 250 C
Final Printing Temperature 250 C
Build Plate Temperature 100 C
Build Plate Temperature Initial Layer 100 C
Flow 100%
Initial Layer Flow 100%
Print Speed 15 mm/s
  Infill Speed 20 mm/s
  Wall Speed 7 mm/s
    Outer Wall Speed 15 mm/s
    Inner Wall Speed 25 mm/s
  Top Surface Skin Speed 15 mm/s
  Top/Bottom Speed 15 mm/s
Travel Speed 125 mm/s
  Initial Layer Print Speed 10 mm/s
  Initial Layer Travel Speed 125 mm/s
Skirt/Brim Speed 10 mm/s
Number of Slower Layers 2
Equalize Filament Flow No
Enable Acceleration Control No
Enable Jerk Control No
Enable Retraction Yes
Retract at Layer Change Yes
Retraction Distance 8 mm
Retraction Speed 25 mm/s
  Retraction Retract Speed 25 mm/s
  Retraction Prime Speed 25 mm/s
Retraction Extra Prime Amount 0 mm2
Retraction Minimum Travel 0.6 mm
Maximum Retraction Count 25
Minimum Extrusion Distance Window 1 mm
Combing Mode All
Max Comb Distance With No retract 0 mm
Retract Before Outer Wall Yes
Avoid Printed Parts When Traveling Yes
Avoid Supports When Traveling No
Travel Avoid Distance 1 mm
Layer Start X 0 mm
Layer Start Y 0 mm
Z Hop When Retracted No
Enable Print Cooling Yes
Fan Speed 100%
  Regular Fan Speed 100%
  Maximum Fan Speed 100%
Regular/Maximum Fan Speed Threshold 10 s
Initial Fan Speed 0%
  Regular Fan Speed at Layer 3
Minimum Layer Time 10 s
Minimum Speed 5 mm/s
Lift Head Yes
Enable Prime Blob Yes
Build Plate Adhesion Type Skirt
Skirt Line Count 1
Skirt Distance 5 mm
Skirt/Brim Minimum Length 250 mm